Philips FW-V787 Stereo System User Manual


 
27
English
3140 115 30041
Tape Operation/Recording
To select another track during recording
1 Pressí or ë to select the desired track.
2 Press PLAYÉÅ to resume recording.
To stop recording
Press Ç.
Recording and disc playback will stop
simultaneously.
Dubbing Tapes
1 Load the prerecorded tape in tape deck 1.
You can set the tape to the desired passage
where recording will start.
2 Press DUBBING.
Playing and recording will start simultaneously.
"DUB OOO" will be displayed.
Dubbing of tapes is possible on one side of the
tape only. To continue recording on the reverse
side, at the end of side A, flip the tapes to side B
and repeat the procedure.
To stop dubbing
Press Ç.
Notes:
Dubbing of tapes is possible only from tape
deck 1 to tape deck 2.
To ensure good dubbing, use tapes of the same
length.
You can listen to another source while dubbing.
Microphone Mixing
Connect a microphone (not supplied) to the
system allowing you to sing along with the
music source.
1 Connect a microphone to the MIC jack.
Before connecting the microphone, set the
microphone LEVEL to the minimum level
to prevent howling sound.
2 Press VCD, TUNER, TAPE or AUX to
select the source to be mixed and start
playback.
Karaoke
MIC/
LEVEL
3 Adjust the volume level of the source with
VOLUME control.
4 Adjust the microphone volume with microphone
LEVEL control.
Note:
Keep the microphone away from the speakers to
prevent howling.
For Recording, please refer to “Tape
Operation/Recording”.