Filter
Top Products
20
English
3140 115 31011
OSD – On Screen Display
If you insert VCD, your TV screen will serve as an
additional display for messages (e.g. PLAY, STOP),
and information stored on the VCD.
● Press OSD on the remote control repeatedly to
switch on or off the On Screen Display.
When OSD is switched ON; you can see the
following display on the TV screen.
Below is an example of the OSD message.
SINGLE ELAPSED
PLAY XX/TT MM:SS
–"XX" is the current track.
–"TT" is the total tracks.
–"MM" is in minutes.
–"SS" is in seconds.
Note:
–You can also view the information from a
MP3-CD or normal CD.
Playing a Video CD with PBC
VCD with PBC (Playback Control) will be
indicated on the display of the set as soon as
they are inserted. PBC is a predefined play
sequence stored on the VCD.
1 Switch on the TV, insert a VCD with PBC and
press PLAYÉÅ to start playback.
2 MENU appears on the TV screen.
If the menu consists of a list of titles, you
can select a sequence directly
● Press Digits 0–9 on the remote control to
select your choice.
➜ The VCD starts playing of the selected
sequence automatically.
Note:
– If a menu consists of more than one page, press
¡
/
™
to go through the pages.
Switching off PBC
● In stop mode, press PBC.
➜ “PBC OFF” will be displayed.
Notes:
–Programme mode is not available whenever PBC
mode is switched on.
– The menu structure depends on the information
stored on the VCD. Please refer to the information
supplied with the disc.
CD/VCD/MP3-CD Operation
VIDEO CD
1
3
2
4
6
5
7
9
8
VOLUME
0
2
TAPE 1/2
OSD
VCD 123
AUX
TUNER
á
à
ë
í
Ç
VAC
DSC
MAXECHO
RETURN
PBC
DIGEST
É
Å
TITLE
_
TITLE
+
ALBUM
_
ALBUM
+
TITLE/
ALBUM
NAME
A-B
RESUME
ZOOM
SLOW
VOCAL
KEY CONTROL
IS
+-
MP3 123
Ö
REPEATPROG
DBB
Adjusting the TV System
Before viewing the Video CD, ensure that the set
is switched to corresponding PAL or NTSC
system of your TV set (except Multi–system TV).
● Press and hold PAL/NTSC for
more than 2 seconds to
switch between PAL or NTSC
TV system.
➜ After TV system is selected,
the set will automatically switch
to the last TV system setting every time the VCD
source is selected.
Note:
– Before adjusting the TV system, make sure that
there is no MP3-CD in disc tray 1 during power up.
CD 1•2•3
TUN
VCD
PAL/
NTSC