Philips FW-V320/21 Stereo System User Manual


 
26
English
3139 115 20852
Recording
STANDBY
-
ON
PROGRAM DIM
FULL AUTO STOP
PLAYBACKPLAY/REC
VCD MP3-CD MINI HIFI SYSTEM
CD1 2 3 BAND
TAPE 1 2
STOPCLEAR
PLAY PAUSE
CDR/VIDEO
RECORD
DUBBING A.REPLAY
VOLUME
CLOCKTIMER
RETURNPBC
DEMO STOP
OPEN
TAPE 2
TAPE 1
OPEN
PAL/NTSC
SEARCHTUNING
PREV NEXT
PRESET
MP
3
-
CD
ALBUM
+
TITLE
+
MICROPHONE - LEVEL
TAPEVCD TUNER
AUX
D
B
B
V
E
C
D
S
C
T
E
C
H
N
O
R
O
C
K
J
A
Z
Z
O
P
T
I
M
A
L
INCREDIBLE
SURROUND
JOG
CONTROL
Notes:
If you do not intend to record via the
microphone, unplug the microphone to avoid
accidental mixing with other recording source.
For recording, use only tape of IEC type I
(normal tape).
The tape is secured at both ends with leader
tape. At the beginning and end of tape, nothing
will be recorded for six to seven seconds.
The recording level is set automatically,
regardless of the position of VOLUME, Incredible
Surround, DSC or VEC.
To prevent accidental recording, break out the
tab on the left shoulder of the tape side that you
want to protect.
If "CHECK TAPE" is displayed, the protection
tab has been broken. Put a piece of clear adhesive
tape over the opening.
Recording the mixed sound /
One Touch Recording
During microphone mixing, you can record the
mixed sound on a tape in tape deck 2 except
dubbing mode.
For One Touch Recording, as soon as you press
RECORD, the current source (VCD, TUNER or
AUX) will be recorded on tape deck 2.
1 Load a blank tape in tape deck 2.
2 Press RECORD to start recording.
The REC starts flashing.
3 Press Ç to stop recording.
Note:
When you press RECORD while in TAPE mode,
"SELECT SOURCE" will be displayed. One Touch
Recording is not possible in TAPE mode.
pg 01-32/V320/21-Eng 28/05/2001, 09:02 AM26