Filter
Top Products
EN 11
English
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage set on the voltage
selector on the back of the unit.
Before connecting the AC power cord, ensure you •
have completed all other connections.
Note
The type plate is located on the back of the main unit. •
1 Connect the AC power cable to:
the main unit.•
the wall socket.•
Prepare the remote control
Note
Risk of explosion! Keep batteries away from heat, •
sunshine or fi re. Never discard batteries in fi re.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
If you are not going to use the remote control for a •
long time, remove the batteries.
Do not use old and new or different types of batteries •
in combination.
Batteries contain chemical substances, so they should •
be disposed of properly.
Auto install radio stations
When you connect power and no radio
stations are stored, the unit automatically begins
to store radio stations.
1 Connect the unit to the power supply.
[AUTO INSTALL - PRESS PLAY] (auto »
install - press the PLAY button) is
displayed.
2 Press on the main unit to start
installation.
[AUTO] (auto) is displayed. »
The unit automatically stores radio »
stations with suffi cient signal strength.
When all the available radio stations »
are stored, the fi rst preset radio station
is broadcast automatically.
3
1
2
FWM387_DFU_ENG_12.indd 章节1:11FWM387_DFU_ENG_12.indd 章节1:11 1/16/2009 11:06:57 AM1/16/2009 11:06:57 AM