Filter
Top Products
10 EN
3 Get started
Caution
Use of controls or adjustments or performance of •
procedures other than herein may result in hazardous
radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for the
model and serial number of this apparatus. The
model number and serial number are on the
back of the apparatus. Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Connect speakers
Note
For optimal sound, use the supplied speakers only. •
• Connect only speakers with impedance that is the
same or higher than the supplied speakers. (see
‘Speakers’ on page 20 )
Note
Ensure that the colors of the speaker wires and •
terminals are matched.
1 Hold down the socket fl ap.
2 Insert the stripped part of the wire
completely.
Insert the right speaker wires to “ • R ”,
left speaker wires to “ L ”.
Insert the red wires and blue wires •
to “ + ”, black wires to “ - ”.
3 Release the socket fl ap.
Connect FM antenna
1 Connect the supplied FM antenna to the
FM jack on the back of the main unit.
Connect MW antenna
1 Prepare the MW loop antenna.
2 Connect the MW loop antenna to the
MW jack on the back of the main unit.
FWM387_DFU_ENG_12.indd 章节1:10FWM387_DFU_ENG_12.indd 章节1:10 1/16/2009 11:06:56 AM1/16/2009 11:06:56 AM