Filter
Top Products
20
Clock/Timer
Setting the sleep timer
The sleep timer enables the system to switch
off by itself after a set period of time.
1
In active mode, press SLEEP on the remote
control repeatedly until the desired timer op-
tion appears.
©
Selections are as follows (time in minutes):
SLPOFF
=
SLP120
=
SLP90
=
SLP60
=
SLP45
=
SLP30
=
SLP15
=
SLPOFF
©
Display shows
if activated, and disappears
if deactivated.
2
To cancel the sleep function, either press
SLEEP on the remote control once or more
until “
SLPOFF
” appears, or press
y
to switch
to standby mode.
To check the remaining length of time
after sleep timer is activated
M
Press SLEEP once.
Setting the clock
1
In standby mode, press and hold CLOCK/
DISPLAY.
©
7KHFORFNGLJLWVIRUWKHKRXUVÁDVK
2
Press
¡1
/
2™
on the system (or
¡
/
™
on
the remote) to set the hours.
3
Press CLOCK/DISPLAY.
©
7KHFORFNGLJLWVIRUWKHPLQXWHVÁDVK
4
Press
¡1
/
2™
(or
¡
/
™
on the remote) on
the system to set the minutes.
5
Press CLOCK/DISPLAY WRFRQÀUPWKH
time.
To view the clock in active mode
M
Press CLOCK/DISPLAY.
Note:
– If the clock has not been set, - -:- - will be
displayed.
– If the last selected source is MP3-LINK/
AUX, you cannot use the remote control to
set the clock in standby mode.