Filter
Top Products
18
Tuning to radio stations
1
Press TUNER on the system or TUN on the
rem
ote control to select TUNER source.
2
Press TUNER on the system or TUN on the
remote control once or more to select desired
waveband: FM or AM.
3
Press TUNING+/- (or
5
/
6
on the remote
control) to tune to a desired radio frequency.
M
You can also press and hold TUNING+/- (or
5
/
6
on the remote control) for three sec-
onds to search for a radio station.
©
SEArCH
is displayed.
Note:
– The system is equipped with a built-in AM
DQWHQQDDQGDÀ[HG)0DQWH
nna. For optimal
AM reception, adjust the position of the
main set until the strongest signal is found.
For optimal FM reception, fully extend and
adjust the position of the FM antenna until
the strongest signal is found.
Radio Reception
Programming radio stations
You can store up to 20 radio stations in the
memory manually or automatically (Auto store).
Automatic programming
In tuner mode, press and hold PROGRAM on
the remote control for more than 2 seconds to
activate programming.
©
All available stations are programmed in the
order of waveband reception strength.
M
To cancel the programming, press
9
.
Manual programming
1
Tune to your desired station (refer to “Tuning
to radio stations”).
2
Press PROGRAM to activate programming.
©
P1
is displayed and PROGÁDVKHVRQWKH
display.
3
Press ALBUM/PRESET +/- to allocate a pre-
set number.
4
Press
PROGRAM
DJDLQWRFRQÀUPWKHVHWWLQJ
5
Repeat the above four steps to store other sta-
tions.
M
You can override a preset station by storing
another frequency in its place.
Tuning to preset radio stations
M
Press ALBUM/PRESET +/- until the desired
preset station is displayed.