Philips FW-C72 Stereo System User Manual


 
3139 116 19521 (ENG)
20
Selecting External
Equipment
If you have connected the audio out
terminals of the external equipment
(TV, VCR, Laser Disc player, DVD player,
or CD Recorder) to the AUX/CDR IN
terminals, you can hear the enhanced
sound from the system.
1 Press AUX to select CDR mode.
"CDR" will be displayed.
2 Press AUX again to select the
external (normal AUX) mode.
"AUX" will be displayed.
REC
SHUFFLE
TIMER
STEREO
FM
BACK
HSD
REPEAT
PROGRAM
LW
MW
AM
T.A.
NEWS
SOUND NAVIGATION
TAPECD
PROG
CLOCK/
TIMER
NEWS!
RDS
DOLBY B
NR
HSD
REC
STANDBY
ON
SIDEA•B
A.REV
TUNER AUX
PRESET
STOP•CLEARSEARCH • TUNING PLAYPAUSE PREV NEXT
MINI HIFI SYSTEM
CD1 • 2 • 3
CDR / VIDEO
FM • AM
TAPE 1 • 2
FRONT
60Hz
500Hz
250Hz
1KHz
2KHz
4KHz
8KHz
VOLUME
SS
LR
C
PRO LOGIC
SIDE
DYNAMIC BASS
BOOST
INCREDIBLE
SURROUND
DIGITAL
SOUND CONTROL
TAPE AUX/CDR
If tape 2 is selected for playback;
T2 ” with "< or >" scrolling left
or right will be displayed
depending on the tape side
selected.
3a(for playback on tape deck 2 only)
Press í or ë to select tape side
(see Tape Side).
Press A. REV to select the different
type of playback mode (see Auto
Reverse Playback).
4 Press Ç to end playback.
T1 or T2” with “<<< or >>>
will be displayed.
Rewind/Fast Forward
When playback is stopped
1 You can rewind or fast forward the
tape by pressing à or á
respectively.
If rewinding, "T1 < or T2 <"
with “<” scrolling left will be
displayed.
If fast forwarding, "T1 > or
T2 >" with “>” scrolling right will
be displayed
The tape will stop automatically at
the end of the rewinding or fast
forwarding.
2 Press Ç to stop rewinding or fast
forwarding.
During playback
Press and hold à or á until the
desired passage is located.
T1 or T2” with “<< or >>”"
scrolling left or right will be
displayed depending on which
button is pressed.
During searching, the sound is
reduced to a low volume.
When you release à or á, the
tape continues playing.
Notes:
During rewinding or fast forwarding of
a tape, it is also possible to select
another source (e.g. CD, TUNER, or
AUX).
Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
C-120 tape is extremely thin and is
easily deformed or damaged. It is not
recommended for use in this system.
Store the tapes at room temperature
and do not put them too close to a
magnetic field (for example, a
transformer, TV, or speaker).
.
Notes:
There are two Auxiliary modes:
i. the normal AUX mode.
ii. the CDR mode, where the LINE
OUT of this mini system is muted.
You will not be able to record or
listen to the sound from the LINE
OUT.
You are advised not to listen to and
record from the same source
simultaneously.
All the sound control features (e.g. DSC,
DBB, etc.) are available for selection.
pg 01-27/C71-C72/37-Eng 12/16/99, 1:20 PM20