Filter
Top Products
27
English
3139 115 20641
Clock/Timer
3 Press à or á on the system to set the hour
for the timer to start.
4 Press í or ë on the system to set the minute
for the timer to start.
5 Press CLOCK•TIMER to store the start time.
➜ The timer is now set.
➜ The TIMER remains on the display.
¶ At the preset time, the timer will be activated.
➜ The selected source will be played.
Notes:
– During timer setting, if no button is pressed
within 90 seconds, the system will exit timer setting
mode automatically.
– If the source selected is TUNER, the last tuned
frequency will be switched on.
– If the source selected is CD, playback will begin
with the first track of the selected disc or
programme. If the disc trays are empty, the TUNER
will be selected instead.
– The timer will not activate if a recording is in
progress.
To switch off the TIMER
1 Press and hold CLOCK•TIMER for more than
2 seconds.
2 Press Ç on the system to cancel the timer.
➜ The timer is now switched off.
➜ The display will show "OFF" and the TIMER
disappears.
To start the TIMER again (for the same
preset time and source)
1 Press and hold CLOCK•TIMER for more than
2 seconds.
2 Press CLOCK•TIMER again to store the start
time.
➜ The timer is now on.
➜ The TIMER appears on the display.
Sleep Timer (only on remote control)
This feature allows you to select a length of time
after which the system will switch to the standby
mode automatically.
1 Press SLEEP on the remote control repeatedly
to select a period of time.
➜ The selections are as follows (time in
minutes): 15 ™ 30 ™ 45 ™ 60 ™ OFF ™
15 …
➜ "SLEEP XX" or "OFF" will be displayed. "XX"
is the time in minutes.
2 When you reach the desired length of time, stop
pressing the SLEEP button.
➜ The SLEEP display lights up.
➜ The Sleep Timer is now set. Before the
system switches to standby mode, a countdown
of 10 seconds will be displayed.
"SLEEP 10" ™ "SLEEP 9".... ™ "SLEEP 1"
™ "SLEEP"
While SLEEP mode is activated
¶ Press SLEEP once to view the remaining length
of time.
¶ Press SLEEP twice to change the pre-selected
period of time.
➜ The display will show the remaining time
followed by the sequence of sleep timer options.
To switch off the Sleep Timer
¶ Press SLEEP repeatedly until "OFF" is displayed,
or press the STANDBY-ON button.
pg 01-30/C380/22-Eng 12/7/00, 3:43 PM27