Filter
Top Products
26
English
3139 115 20641
Clock/Timer
CD1 • 2 • 3
TAPE 1 • 2
MINI HIFI SYSTEM
VIDEO/CDR
STOP• CLEAR
SEARCH•TUNING
RECORD
PLAY• PAUSE PREV NEXT
PRESET
CLOCK•TIMERDUBBINGA. REPLAY PROGRAM
▲
▲
SOUND NAVIGATION - JOG
VOLUME
DISC 1
DISC 2
DISC 3
CD TUNER TAPE AUX
D
B
B
V
E
C
D
S
C
I
N
C
R
E
D
I
B
L
E
S
U
R
R
O
U
N
D
STAND BY -O N
ECO
POWER
DIM MODE
DEMO STOP
BAND
RDS
NEWS
2
21
3
TUNERTAPE 1/2CD
OSMAUXINC.SURR.
DSC VEC
DBB 1/2/3
REPEAT
SLEEP
SHUFFLE
CD DIRECT
VOLUME
á
à
ë
í
É
Ç
Å
View Clock
You can view the clock (if it is set) if the system
is in Standby mode or when any sound source is
selected (CD, TUNER, etc.). The clock will be
displayed for about seven seconds.
¶ Press CLOCK•TIMER briefly (on the system
only).
➜ “PM10:38 or 22:38” (the current time) will
be displayed depending on whether you have
selected 12- or 24-hour mode.
➜ “--:--” will be displayed if the clock is not
set.
Clock Setting
The clock can be set in either 12- or 24-hour
mode, e.g. “AM12:00“ or “00:00“. Before
setting the clock, you must be in the View Clock
mode.
1 Press CLOCK•TIMER to select clock mode.
2 Press PROGRAM to select 12- and 24- hour
mode.
➜ If 12-hour mode is selected, “AM12:00“
starts flashing.
➜ If 24-hour mode is selected, “00:00” starts
flashing.
3 Set the hour with à or á on the system.
4 Set the minute with í or ëon the system.
5 Press CLOCK•TIMER again to store the
setting.
➜ The clock starts.
¶ To exit without storing the setting, press Çon
the system.
Notes:
– During clock setting, if no button is pressed
within 90 seconds, the system will exit clock setting
mode automatically.
– When a power interruption occurs, the clock
setting is erased.
Timer Setting
¶ The system can switch on to CD , TUNER or
TAPE mode automatically at a preset time. It can
serve as an alarm to wake you up.
¶ Before setting the timer, make sure the clock is
set correctly.
¶ The timer will always be switched on once it is
set.
¶ The volume of the timer will increase
from the minimum level to the most
recently selected volume level.
1 Press and hold CLOCK•TIMER for more than
2 seconds to select timer mode.
➜ “AM12:00” or “00:00" or the last timer
setting starts flashing depending on whether you
have selected 12- or 24-hour mode.
➜ The TIMER starts flashing.
➜ The selected source is lit while other available
sources are flashing.
2 Press CD , TUNER or TAPE to select the
desired source.
¶ Before selecting CD or TAPE, make sure a disc
or tape is loaded in the CD tray or tape deck 2.
pg 01-30/C380/22-Eng 12/7/00, 3:43 PM26