Philips FW-C30/21 Stereo System User Manual


 
3139 116 19351
21
English
TIMER SLEEP TIMER
5 Press CLOCKTIMER again to store the
setting.
The clock starts.
To exit without storing the setting, press
Ç on the system.
Notes:
During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
When a power interruption occurs, the
clock setting is erased.
Timer Setting
The system can switch on to CD or
TUNER mode automatically at a preset
time. It can serve as an alarm to wake
you up.
Before setting the timer, make sure the
clock is set correctly.
The timer will always be switched on
once it is set.
The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
1 Press and hold CLOCKTIMER for more
than
2 seconds
to select timer mode.
12:00 AM or 00:00" or the last
timer setting starts flashing
depending on whether you have
selected 12- or 24-hour mode.
The TIMER starts flashing.
The selected source is lit while other
available sources are flashing.
2 Press CD or TUNER to select the
desired source.
Before selecting CD, make sure a CD is
loaded in the CD carousel tray.
3 Pressà or á on the system to set the
hour for the timer to start.
4 Pressí or ë on the system to set the
minute for the timer to start.
5 Press CLOCKTIMER to store the start
time.
The timer is now set.
The TIMER remains on the display.
At the preset time, the timer will be
activated.
The selected source will be played.
Notes:
During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
If the source selected is TUNER, the last
tuned frequency will be switched on.
If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD trays
are empty, the TUNER will be selected
instead.
The timer will not activate if a recording
is in progress.
To switch off the TIMER
1 Press and hold CLOCKTIMER for more
than
2 seconds
.
2 Press Ç on the system to cancel the
timer.
The timer is now switched off.
The display will show "CANCEL"
and the TIMER disappears.
To start the TIMER again
(for the same
preset time and source)
1 Press and hold CLOCKTIMER for more
than
2 seconds
.
2 Press CLOCKTIMER again to store the
start time.
The timer is now on.
The TIMER appears on the display.
Sleep Timer
(only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
1 Press SLEEP on the remote control
repeatedly to select a period of time.
The selections are as follows (time in
minutes):
60 45 30 15 OFF 60
SLEEP XX or OFF will be
displayed. "XX" is the time in
minutes.
2 When you reach the desired length of
time, stop pressing the SLEEP button.
After this amount of time passes, the
system will switch to the standby
mode.
To switch off the Sleep Timer
Press SLEEP repeatedly until "OFF" is
displayed, or press the STANDBY ON
button.
pg 01-24/C30/21&/30-En 3/3/00, 4:23 PM21