Filter
Top Products
10
3139 116 17942
English
Important:
Before you begin operating the system, complete
the preparation procedures.
Demonstration mode
The system has a demonstration mode that shows the
various features offered by the system.
Whenever the
system is switched on from the wall socket, the
demonstration mode will start automatically.
Note:
– During demonstration mode, if you press any source
(or standby-on) button, the system will switch to the
respective (or standby) mode.
– When the system is switched to standby mode, 5
seconds later, the demonstration mode will resume.
To cancel demonstration mode
• Press and hold STOP Ç
(on the system only)
for
3
seconds
to stop the demonstration.
™ The demonstration mode will be switched off
permanently.
™ The system will switch to standby mode.
Easy Set
EASY SET allows you to store all available radio stations
in a particular band (FM, MW or LW) automatically.
• Press and hold STANDBY•ON
(on the system only)
for 2 seconds; when the system is in standby or
demonstration mode.
™ "EASY SET" will be displayed and followed by
"TUNER".
™ EASY SET will start with the last active band.
AM
REPLAY
REC
HSD
MAX
PM
LW
MW
NEWS
PROGRAM
SHUFFLE
REPEAT
MINI HIFI SYSTEM
FW 318C
DIGITAL SOUND CONTROL
STANDBY
.
ON
CD
1
• CD
2
• CD
3
BAND
TAPE 1 • TAPE 2
VIDEO
SURROUND CONTROL
INCREDIBLE SURROUND
n
TIMER
CLOCK
PROGRAM
RDS NEWS!
CLEAR
TUNING
▲
▲
▲
▲
STOP
SEARCH
PLAY
PAUSE
PREV NEXT
PRESET
▲
▲
DUBBING
NORMA•HIGH
VOLUME
RECORD A. REPLAY
FM
TIMER
I S
STEREO
DBB
AUXTAPETUNERCD
OPTIMAL
TECHNO
DSC
DBB
ROCK
JAZZ
OPERATING THE SYSTEM
™ All available radio stations with sufficient signal
strength will be stored or until 40 presets are filled.
Notes :
– When EASY SET is used, all previously stored stations
will be erased.
– The last preset station will appear on the display
when EASY SET is completed.
Switching the system ON
• Press STANDBY•ON
(on the system only)
, CD,
TUNER, TAPE or AUX.
You can also switch on the system by pressing any one of
the 3 CD DIRECT PLAY buttons.
Switching the system to standby mode
• Press STANDBY•ON again.
™ The system will switch to standby mode.
Selecting the Source
• Press the respective source selection button: CD,
TUNER, TAPE or AUX.
™ The display indicates the selected source.
Note:
– For an external source, make sure that you have
connected the audio left and right OUT terminals of
the external equipment (TV, VCR, Laser Disc or DVD
player) to the AUX IN terminals.
Untitled-26 6/15/00, 4:52 PM10