Philips DVP3950 Home Theater System User Manual


 
14 EN
MP3: 22.05 kHz, 24 kHz, 32 kHz, 44.1
kHz 48 kHz
WMA: 44.1 kHz, 48 kHz
Constant bit rate:
MP3: 8 kbps - 320 kbps
WMA: 32 kbps - 192 kbps
Main unit
Dimensions (W x H x D): 310 x 39.5 x
210 (mm)
Net Weight: 1.0 kg
Power
Power supply rating: AC 230V~, 50 Hz
Power consumption: 10 W
Power consumption in standby mode:
0.5 W
Accessories supplied
Remote control and one battery
User manual
Laser specication
Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
Wave length: 658 nm (DVD), 790 nm
(CD)
Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
Beam divergence: 60 degrees
6 Troubleshooting
Warning
Risk of electric shock. Never remove the casing of the
player.
To keep the warranty valid, never try to repair
the player yourself.
If you have problems using this player, check the
following points before you request service. If
you still have a problem, register your player and
get support at www.philips.com/support.
If you contact Philips, you will be asked for the
model and serial number of this player. The
model number and serial number are on the
back of this player. Write the numbers here:
Model No. _____________________________
Serial No. _____________________________
No picture.
The TV video input channel is not correctly
selected (see the TV's user manual).
If you have changed a TV system setting,
switch back to the default setting: 1) Press
to open the disc compartment. 2) Press
SUBTITLE.
No sound output from the TV.
Make sure that the audio cables are
correctly connected between this player
and the TV.
No sound during DivX video playback.
The audio codes are not supported.
No audio output from the loudspeakers of the
connected external audio device (for example,
stereo system, amplier receiver).
Make sure that the audio cables or coaxial
cable are correctly connected.
Switch the external audio device to
correct audio input source.