Philips DVP3950 Home Theater System User Manual


 
13
English
EN
4 Software update
Note
Power supply must not be interrupted during software
update.
To check for updates, compare the current
software version of this player with the latest
software version (if available) at the Philips
website.
1 Press .
2 Select [Setup] > [Preferences] > [Version
Info], and then press OK.
3 Write down the model name and the
software version number.
4 Visit www.philips.com/support to check for
the latest software version, using the model
name and software version number.
5 Refer to the upgrade instructions given
on the website to complete the software
update.
5 Specifications
Note
Specications are subject to change without notice
Region code
This player can play discs with the following
region codes.
DVD region code Countries
Europe
Playable media
DVD, DVD-Video, VCD, SVCD, Audio CD
DVD+R/+RW, DVD-R/-RW, DVD+R/-R
DL (Dual Layer), CD-R/-RW (maximum
299 folders and 648 les)
USB storage device
File format
Video: avi, .divx, .mp4, .xvid
Audio: .mp3, .wma
Picture: .jpg, .jpeg
USB
Compatibility: Hi-Speed USB (2.0)
Class support: USB Mass Storage Class
File system: FAT16, FAT32
Maximum number of albums/folders: 299
Maximum number of tracks/titles: 648
Support USB HDD (Hard Disc Drive): an
external power source may be needed
Video
Signal system: PAL, NTSC
Composite video output: 1 Vp-p (75 Ohm)
Scart: European connector
Audio
2-channel analog output
Audio Front L&R : 2 Vrms (47k Ohm)
Digital output: 0.5 Vp-p (75 Ohm)
Coaxial
Sampling frequency: