Filter
Top Products
19
If connection is successful. the unit beeps and the » indicator turns
on stably.
If the pairing cannot be completed within one minute, the »
indicator flashes slowly.
Tip
If your Bluetooth device is already paired with DS8550 before, you just need to find •
out the “PHILIPS DS8550” on your Bluetooth menu, then confirm the connection.
To disconnect Bluetooth device,
Move it beyond the communication range; or•
Press • ; or
Turn off the connected device•
Play audio files from bluetooth devices
Note
Make sure the Bluetooth connection between the unit and the device is active. •
To start play, press •
on the remote control.
To pause/resume play, press • again.
To track up/down, press forward/backward keys.•
Play from an external device
You can also listen to an external audio device through this unit.
1 Press to select Aux-in mode.
2 Connect the supplied Aux-in link cable to:
the • AUX IN jack (3.5mm) on the back of the unit.
the headphone jack on an external device.•
3 Start to play the device (see the device user manual).
English
EN