Filter
Top Products
11
English
Before connection of DS3800W to you home
Wi-Fi network, check the points below.
1 Make sure that your Wi-Fi router is
powered on and working properly.
2 Make sure that DS3800W has been
powered on and booted up successfully
(see ‘Turn DS3800W on’ on page 10).
3 Identify the type of your Wi-Fi router (see
the user manual of your Wi-Fi router for
details).
Scenario 1: Connect to a
WPS router
Note
Before you press any button on DS3800W, make sure
that DS3800W has been booted up successfully (see
‘Turn DS3800W on’ on page 10).
1 Press the WPS button on your home Wi-Fi
router.
WPS
4 Connect to
your home Wi-
Fi network for
AirPlay
To connect DS3800W to your existing home
Wi-Fi network, you need to apply your home
Wi-Fi settings to DS3800W.
You can do this in two ways (depending on
which type of Wi-Fi router you use):
Automatically - if your Wi-Fi router is
WPS (Wi-Fi Protected Setup)-enabled
and supports PBC (Push Button
Connection) (see ‘Scenario 1: Connect
to a WPS router’ on page 11)
Manually - if your Wi-Fi router does
not support WPS (see ‘Scenario 2:
Connect to a non-WPS router’ on
page 12)
Once connected successfully, DS3800W will
remember your home Wi-Fi settings. Then
you can enjoy AirPlay whenever DS3800W is
powered on and connected to your home Wi-
Fi network automatically.
EN