Filter
Top Products
15
Program radio stations manually
You can program a maximum of 20 preset
radio stations (FM).
1 Tune to a radio station.
2 Press PROG to activate program mode.
» [PROG] (program) is displayed.
3 Press PRESET +/- to allocate a number
to this radio station, then press PROG to
conrm.
4 Repeat the above steps to program other
stations.
Tip
• To overwrite a programmed station, store
another station in its place.
Select a preset radio station
In tuner mode, press PRESET +/- to select a
preset number.
• You can also press the numeric buttons
to select a preset number directly.
Tip
• Position the antenna as far as possible from
TV, VCR or other radiation source.
• For optimal reception, fully extend and adjust
the position of the antenna.
Show RDS information
RDS (Radio Data System) is a service that
allows FM stations to show additional
information. If you tune to an RDS station, an
RDS icon and the station name are displayed.
1 Tune to an RDS station.
2 Press RDS repeatedly to scroll through
the following information (if available):
» Station name
» Program type such as [NEWS] (news),
[SPORT] (sport), [POP M] (pop
music)...
» RDS RT
» Frequency
» The connected iPod/iPhone/iPad plays
automatically.
• To pause/resume play, press .
• To skip to a track, press / .
• To search during play, press and hold
/ , then release to resume normal play.
Charge the iPod/iPhone/iPad
Note
• iPod with color display, iPod classic, and iPod with
video are not compatible with dock charging.
When the unit is connected to power, the
docked iPod/iPhone/iPad begins to charge.
Listen to radio
Tune to a radio station
1 Press SOURCE repeatedly to select the
tuner source.
2 Press and hold / for more than 2
seconds.
» [SEARCH] (search) is displayed.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
Tip
• To tune to a weak station, press /
repeatedlyuntilyoundoptimalreception.
Program radio stations automatically
You can program a maximum of 20 preset
radio stations (FM).
In the tuner mode, press and hold PROG for
more than 2 seconds to activate automatic
program mode.
» AUTO SCAN (auto scan) is displayed.
» All available stations are programmed in
the order of waveband reception strength.
» Therstprogrammedradiostationis
broadcast automatically.
English
EN