Filter
Top Products
13
English
Start digital recording
1 With the recorder stopped, press RECORD to enter the
Record standby mode.
➜ RECORD will flash.
• If DIG also flashes, the digital connection is incorrect.
2 To start recording, press PLAY and immediately start the
source (from stop mode).
➜ RECORD lights continuously. The track number and
recording time used will be indicated on the display.
• To record a 3-second silence at the start of a track, press
PAUSE.
• To check the (remaining) recording time, press DISPLAY.
(This can also be done during the recording.)
3 To stop recording, press STOP on the CD recorder.
➜ RECORD will go out.
• To interrupt recording, press PAUSE.
➜ RECORD starts to flash. Resume at step 2.
After recording the display will show UPDATE for several
seconds.
Note: With AUTO TRACK on, the recorder will stop
automatically. Recordings from DAT or DCC will stop
after 20 seconds silence. With AUTO TRACK off, the AUTO
STOP mode is disabled.
Preparing for synchronized digital recording
The CD-SYNC feature enables you to make a fast and easy
digital recording of a CD. Track increments are automatically
detected from the digital source material. Track increments
cannot be added manually.
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press Source repeatedly until (depending on the connection
used):
➜
DIG COAXIAL or DIG OPTICAL will appear on the
display.
Start synchronized digital recording
1 With the CD recorder stopped, press CD-SYNC.
➜ On the display, CD-SYNC & SYNC appears. After a
time, RECORD starts to flash.
• If DIG also flashes, the digital connection is incorrect.
2 To start recording, press Play on the digital source.
➜ The CD recorder automatically starts to record and
RECORD lights continuously. The track number and
recording time used will be indicated on the display
• If you start the source during a track, CD-SYNC will not
start recording until the beginning of the next track.
• To check the (remaining) recording time, press Display.
(This can also be done during recording)
3 To stop recording, press STOP on the CD recorder.
➜ CD-SYNC and RECORD will go out.
• To interrupt recording, press PAUSE.
➜
RECORD will start to flash. To resume, press PLAY on the
CD recorder.
PROG
REPEAT 1
A
LOG
DIG
COPY
ERASE
CD SYNC
TOTALAUTO TRACK TRACKREM TIME
RECORD
FINALIZE
CDR
M
IN
I C
D
R
EC
O
R
D
ER
SOURCE
DISPLAY
AUTO / MANUAL
POWER ON/OFF
OPEN/CLOSE
RECORD LEVEL
M
IN
MAX
PREV
STOP
CD SYNCRO
RECORD
ERASE
FINALIZE
PLAY
PAUSE
NEXT
PA
U
SE
C
D SYN
C
TIM
E
0
O
V
E
R
RECO
RD
Synchronized digital recording - CD-SYNC
PROG
REPEAT 1
ANALOG
DIG
COPY
ERASE
CD SYNC
TOTALAUTO TRACK TRACKREM TIME
L
RECORDABLE
RECORD
FINALIZE
RECORDING