Filter
Top Products
15EN
6 Other features
Set the alarm timer
This unit can be used as an alarm clock. You can
select DISC, TUNER, DAB, or USB as alarm
source.
Note
•
Make sure that you have set the clock correctly.
1 In standby mode, press and hold SLEEP/
TIMER for three seconds.
» [SET TIMER] is displayed, and then
[DISC] is displayed and begins to blink.
2 Press / (or SOURCE) repeatedly
to select an alarm source (DISC, TUNER,
DAB, or USB).
3 Press SLEEP/TIMER (or OK)toconrm.
» The hour digits are displayed and begin
to blink.
4 Repeat steps 2-3 to set hour, minute, and
adjust volume of the alarm.
Note
•
If no button is pressed in 90 seconds, the system exits
timer setting mode automatically.
To activate or deactivate the alarm timer:
Press SLEEP/TIMER repeatedly to view the
alarm information and activate or deactivate the
alarm.
» If timer is activated,
is displayed.
» If timer is deactivated, [TIMER OFF] (timer
off) is displayed and
disappears.
Tip
•
If DISC/USB source is selected, but no disc is placed
or no USB connected, the system switches to tuner
source automatically.
Set the sleep timer
To set the sleep timer, in turn on mode, press
SLEEP/TIMER repeatedly to select a set period
of time (in minutes).
» When sleep timer is activated,
is
displayed. Otherwise,
disappears.
Listen to an external device
You can listen to an external device through this
unit with an audio cable.
1 Press SOURCE repeatedly to select
AUDIO IN source.
2 Connect an audio cable (not supplied)
between:
• AUDIO IN jack (3.5 mm) on the unit;
• and the headphone jack on an external
device.
3 Start to play the device (see the device
user manual).
AUDIO IN
PRESET/ALBUM
MUTE
CLOCK SLEEP
TIMER
PROG
SOUND
VOL
REPEAT
MENU
DIM
SOURCE
SCAN
SHUFFLE
RDS
INFO
SOURCE