Filter
Top Products
Option 2 (figure 4)
Connecting the FM transmitter to a
line output of an audio source, e.g.
REC OUT, LINE OUT.
1 Connect the 3.5 mm stereo plug of the
stereo audio cable (15 cm) to the FM
transmitter’s 3.5 mm audio input.
2 Connect the 2 RCA plugs of the stereo
audio cable to a line output (REC OUT or
LINE OUT) of an audio source, e.g.TV, HiFi
or PC:
– Check if the red RCA plug (right
channel) is connected to the right
channel (red) of the audio source.
– Check if the white RCA plug (left
channel) is connected to the left channel
(white) of the audio source.
3 Switch on your audio source.The red
power indication LED of the transmitter
lights up if receiving an audio signal.
4 Switch on the speaker.You may hear a
hissing sound through the speaker if the
speaker is not yet properly tuned to the
transmitter.
5 To tune, turn the tuning wheel until the
signal is at its clearest.
6 In case the line output of the audio source
has an adjustable output level, adjust the
line output level of the audio source to the
highest acceptable undistorted level.
7 Adjust the volume to the desired level with
the speaker volume control.
Basic operation
When the FM transmitter is connected to a:
- line output of an audio source, such as
REC OUT or LINE OUT or
- headphone output of an audio source.
1 Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
2 Switch on the speaker.You may hear a
hissing sound through the speaker if the
speaker is not yet properly tuned to the
transmitter.
3 To tune, turn the tuning wheel until the
signal is at its clearest.
4 Adjust the volume to the desired level with
the speaker volume control.
Audio Connections
8
English
XP SBC BC 8210/00-1.1 20-08-2001 13:43 Pagina 8