Filter
Top Products
Speaker battery replacement
(figure 2)
IMPORTANT
Use only rechargeable LR6/AA NiCd
batteries (preferably Philips).
Do not use alkaline batteries as
these may damage your FM wireless
system!
1 Remove the battery cover.
2 Take out the batteries and dispose of them
properly.
3 Insert new batteries. Only use LR6/AA
NiCd batteries (preferably Philips).
4 Make sure the batteries are correctly
inserted as indicated by the engraved
symbols in the battery compartment.
5 Replace the battery cover.
IMPORTANT
Before using the FM speaker for the
first time, please ensure that the
batteries are fully charged for about
16 hours.This will guarantee a longer
operating lifetime of the batteries.
Audio Connections
Option 1 (figure 3)
Connecting the FM transmitter
SBC HC 8372 to a headphone
output of an audio source
1 Connect the 3.5 mm stereo plug of the
stereo audio cable to the headphone
output of an audio source, such as TV, HiFi
or PC.
– In case your audio source has a 6.3 mm
headphone output, use the 3.5 mm to
6.3 mm stereo adapter plug.
2 Switch on your audio source and carefully
increase the volume of the audio source.
The red power indication LED of the
transmitter lights up if receiving an audio
signal.
3 Switch on the speaker.You may hear a
hissing sound through the speaker if the
speaker is not yet properly tuned to the
transmitter.
4 To tune, turn the tuning wheel until the
signal is at its clearest.
5 Adjust the volume to the desired level with
the speaker volume control.
Installation Audio Connections
7
English
XP SBC BC 8210/00-1.1 20-08-2001 13:43 Pagina 7