Philips AZ1046/12 CD Player User Manual


 
1 During play, press MODE repeatedly until the display shows the shuf e icon.
To stop shuf e play, press MODE again.
Program play sequence
You can store up to 20 tracks in the desired sequence.
1 In stop mode, press PROG to start to program play sequence.
»
[PROG] and [P01] are displayed.
2 Press ALBUM +/- to select an album.
This step is only applicable for MP3-CDs.
3 Press
/ to select a track.
4 Press PROG to store the track.
»
[PROG] and [P02] are displayed.
5 Repeat steps 2 to 4 to select and store all tracks.
When all 20 tracks are stored, no more tracks can be selected and the display shows
»
[PROG] and [ --- ] .
6 To play program, press
.
In stop mode, press
PROG repeatedly to browse stored tracks.
To cancel program, press
twice.
Tip
When program play stops, the CD Soundmachine returns to normal play. To play program
again, repeat steps 1 to 6.
Listen to radio
1 Switch the source selector to TUNER .
2 Switch BAND to FM or MW .
3 Turn TUNING +/- to nd a station.