Filter
Top Products
4
AW 7150/AW 7250/00. page 4
e España
D
eclaración de conformidad con normas
El que suscribe, en nombre y representación de:
Business Unit Portable Audio,
Division of Philips China
Hong Kong Group Company Ltd.
declara, bajo su propia responsabilidad, que el
equipo: Radio casete
fabricado por: BUPA Hong Kong
en: Far East
marca: Philips
modelos: AW 7150/AW 7250
objeto de esta declaración, cumple con la normativa
siguiente: Reglamento sobre Perturbaciones Radio-
eléctricas, Real Decreto 138/1989, Anexo V.
Hecho en: Hong Kong, 01-12-1994
Firma:
Nombre: T.M. Siu
Cargo: Quality Manager
∂ Danmark
Typeskiltet findes på undersiden af apparaten
.
Dette produkt overholder kravene til radio-
interferens af Europæisk Fællesskab.
Bemærk:
Netafbryderen er sekundært inkob-
let og afbryder ikke strømmen fra nettet. Den
indbyggede netdel er derfor tilsluttet til lysnet-
tet så længe netstikket sidder i stikkontakten.
n Norge
Typeskilt finnes på apparatens underside.
Observer: Nettbryteren er sekundert
innkoplet. Den innebygde netdelen er derfor
ikke frakoplet nettet så lenge apparatet er
tilsluttet nettkontakten.
Important notes for users in the U.K.:
Mains plug
This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of
plug proceed as follows:
• Remove fuse cover and fuse.
• Fix new fuse (5 Amp) which should be a BS1362, A.S.T.A. or BSI
approved type.
• Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off
and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5 Amp. If a
plug without a fuse is used, the fuse at the distribution board should not be
greater than 5 Amp.
Note:
The severed plug must be disposed to avoid a possible shock hazard should it be inserted
into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mains lead are coloured with the following code: blue = neutral (N), brown =
live (L).
As these colours may not correspond with the colour markings identifying the terminals in your
plug, proceed as follows:
• Connect the blue wire to the terminal marked N or coloured black.
• Connect the brown wire to the terminal marked L or coloured red.
• Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green
(or green and yellow).
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of
the lead - not simply over the two wires
Copyright:
Recording and playback of material may require consent. See Copyright Act 1956 and The Per-
former’s Protection Acts 1958 to 1972.