Filter
Top Products
6 7ENEN
4 Connect
AW3000 to
your home Wi-
Fi network
There are two options for you to set up
connection between AW3000 and your existing
home Wi-Fi network.
Wired connection
Use an Ethernet cable (not supplied) to
connect AW3000 to your home Wi-Fi router
directly. After successful connection, you can
enjoy wireless streaming to AW3000 through
your home Wi-Fi network.
Wireless connection
Apply your home Wi-Fi settings to AW3000
from an iOS or Android device. Once
connected successfully, AW3000 will remember
your home Wi-Fi settings. Then you can enjoy
wireless streaming whenever AW3000 is
powered on and connected to your home Wi-
Fi network automatically.
Before connection of AW3000 to you home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b AW3000 is powered on and the
power indicator stays amber steadily.
Option 1: Set up wired
connection
Connect an Ethernet cable (not supplied)
to:
the ETHERNET socket on the back of
the unit
one of the Ethernet ports on your
home Wi-Fi router
LAN4To Modem12V=1A ResetLAN3 LAN2 LAN1
3 Prepare
Always follow the instructions in this chapter in
sequence.
Connect power and switch
on
Caution
Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Before you connect the AC adaptor, make sure that you
have completed all the other connections.
Connect the AC power cord to
the DC IN socket on the back of the
unit.
the wall power socket.
» The unit switches on automatically.
» The power indicator blinks amber, and
after a while turns to solid amber.
To switch the unit to standby mode, press
the power button/indicator above
.
DC IN
To switch the unit on from standby mode,
press the power button/indicator above
again.