Filter
Top Products
6EN
4 Product
information
Note
• Product information is subject to change without prior
notice.
Specications
Amplier
Output Voltage 1000 mV RMS
Signal to Noise Ratio >62dBA
Total Harmonic Distortion < 2 %
Bluetooth
Standard Bluetooth Standard Version
2.1+EDR
Frequency Band 2.402~2.480 GHzISM Band
Range 10m(freespace)
General information
AC Power Model: AS030-090-
EE033/EML0900330V
(Philips);
Input: 100-240 V ~,
50/60Hz,0.15A;
Output: 9 V 0.33 A
Operation Power
Consumption
< 3 W
Dimensions - Main Unit
(WxHxD)
74 x 28 x 72 mm
Weight - Main Unit 0.04 kg
5 Troubleshooting
Warning
• Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support).Whenyoucontact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
• Make sure that the AC power adapter is
connected properly.
• Make sure that there is power at the AC
outlet.
No sound from your Hi-Fi system
• Check if the Hi-Fi system is connected to
power.
• Make sure that the system is connected
with the Bluetooth adapter properly.
• Make sure that the Bluetooth wireless
connection is successful.
• Adjust the volume of your system and
Bluetooth device.
• Make sure that the Hi-Fi system is in
Audio-in or line-in mode.
About Bluetooth device
The audio quality is poor after connection
with a Bluetooth-enabled device.
• The Bluetooth reception is poor. Move the
device closer to the Bluetooth adaptor or
remove any obstacle between the device
and the adaptor.