Filter
Top Products
5 EN
• If your Bluetooth device has been paired
with the Bluetooth adapter before, press .
» The Bluetooth adapter attempts to connect
the previously connected Bluetooth device.
If it fails, the adapter returns to the pairing
mode.
Tip
• If the Bluetooth adapter fails to pair with a Bluetooth
device, the Bluetooth adapter exits the pairing mode
in 2 minutes, and the LED light becomes dim. You can
press to return to pairing mode.
LED
indications
Description
Solid blue The Bluetooth adapter and your
Bluetooth-enabled device are
connected.
Flashing
blue
The Bluetooth adapter is waiting
to be paired with a Bluetooth-
enabled device.
Dim light The Bluetooth adapter is neither
in connection with a Bluetooth
device nor in the pairing mode.
Play from Bluetooth-enabled
devices
Note
• The effective operating range between the Bluetooth
adapter and the paired device is approximately 10
meters(30feet).
• Keep this Bluetooth adapter away from other electronic
devices that may cause interference.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Make sure that the Bluetooth adapter is connected to
the powered Hi-Fi system correctly.
• Make sure that your Hi-Fi system is in Audio-in or
line-in mode.
1 On your Bluetooth device, turn on
Bluetooth function and search for
Bluetooth devices (refer to the device's
usermanual).
2 When [PhilipsBT] (Philips Bluetooth
adapter)isdisplayedonyourdevice,
select it to start pairing and connection. If
necessary, enter default password “0000”.
» If connection is successful, the
Bluetooth indicator becomes solid
blue.
3 Play audio on your device.
» Audio streams from your device to
your Hi-Fi system.
Note
• If your Bluetooth device has been paired with AEA2000
before,youjustneedtondout[PhilipsBT] on your
Bluetooth menu, then start the connection.
• This Bluetooth adaptor can memorize up to 8
previously paired devices.
To disconnect the Bluetooth-enabled device:
• Press again;
• Tap [PhilipsBT] on the Bluetooth menu
again;
• Deactivate Bluetooth function on your
device; or
• Move the device beyond the
communication range.
To connect another Bluetooth device:
1 Disconnect the previously connected
device.
2 Pair with your selected Bluetooth device.
To clear pairing history in the Bluetooth
adapter:
Press and hold for 7 seconds.
» The Bluetooth indicator stays in solid blue
for 2 seconds, then returns to the previous
status.