Filter
Top Products
1 In DAB mode, press MENU to enter menu
options.
2 Press
1 / 2 repeatedly until "DRC value" is
displayed.
3 Press SELECT to enter the sub-menu.
➜ The current DRC level will be displayed
on the first line.
4 Press
1 / 2 to select a DRC value (DRC 0,
DRC 1 and DRC1/2) displayed on the sec-
ond line.
5 Press SELECT to confirm the selection
when the requied value is displayed.
➜ You should be able to hear the difference
in compression immediately.
Helpful hints:
– The best way to determine which of these
DRC value settings suits you best is to exper-
iment with them on a variety of source mate-
rial.
Autoscan local
1 In DAB mode, press MENU to enter menu
options.
2 Press
1 / 2 repeatedly until "Autoscan
local" is displayed.
3 Press SELECT to confirm the selection.
➜ The local search for DAB station(s) will
be performed.
Autoscan full
1 In DAB mode, press MENU to enter menu
options.
2 Press
1 / 2 repeatedly until "Autoscan full"
is displayed.
3 Press SELECT to confirm the selection.
➜ The wide range (full scan) search for
DAB station(s) will be performed.
Helpful hints:
–Performing a DAB scan will restore the can-
celled station(s) to the selection list if the sta-
tion(s) become(s) activated again.
Sw version
This is only provided as the version number
for this product.
Switching on FM radio
1 In standby mode, press
2
to switch to the
last selected sound source.
2 Press SOURCE to select FM mode if "FM"
is not displayed.
➜ Waveband and radio frequency are dis-
played
(see
5
).
Tuning to radio stations
1 In FM mode, press SCAN until frequency
number starts running.
➜ The radio will auto tune to a station of
strong signal strength, and search will stop.
2 To tune to a weak station, press 1 / 2 until
an optimum reception is found.
3 Repeat the steps above until you find the
desired station.
Helpful hints:
– Before pressing SCAN,you may first press
2
to select a scan up, or press 1 to select a
scan down.
Storing FM presets
You can store up to 5 FM stations on
PRE-
SET
for easy access.
1 In FM mode, tune to your desired radio sta-
tion (See "Tuning to radio stations").
2 Press
PRESET
once, and then press 1 / 2 to
select preset numbers.
3 Press
SELECT
on the top of the set to
store the preset station.
Helpful hints:
– If you have already saved a FM station in that
preset location, it will be overwritten by a
new station.
– When you store FM stations, these do not
overwrite your DAB presets.
Selecting a preset FM station
1 In FM mode, press
PRESET
on the top of
the set.
2 Press
1 / 2 to select presets 1-5.
3 Press SELECT to confirm the selection.
DAB Radio FM Radio
AE5900_05_CCR 2007.8.31 14:44 Page 10