Pelco FR8316 Satellite Radio User Manual


 
C2603M (6/06) 13
CONNECTIONS
Connections to the FT8316 transmitter and FR8316 receiver are made on the rear panel of the
modules and consist of the following:
Power connection
NOTES:
A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when
used as a stand-alone module. A 12 VDC power supply is provided. If a 24 VAC power
supply is used, the power supply must be a Listed Direct Plug-In Power Unit marked as
Class 2 and rated as 24 VAC, 1 A (minimum output).
In extreme temperature conditions, it is recommended that an industrial-rated outdoor
power supply such as the Pelco WCS1-4 power supply be used.
Fiber connection
Video input connections (transmitter only)
Video output connections (receiver only)
Figure 5 illustrates FT8316 transmitter/FR8316 receiver connections.
Figure 5.
FT8316 Transmitter/FR8316 Receiver Connections
13
14
15
16
9
10
11
12
5
6
7
8
1
2
3
4
POWER CONNECTION
FOR STAND-ALONE MODULE
FIBER
OPTIC
CABLE
POWER/ALARM
CONNECTION FOR
RACK-MOUNTED MODULE
COAXIAL
CABLE
COAXIAL
CABLE
COAXIAL
CABLE
COAXIAL
CABLE