Filter
Top Products
12 C2603M (6/06)
Installation
PACKAGE CONTENTS
The following items are supplied:
1 FT8316 transmitter or FR8316 receiver
1 Regulated switching power supply with either of the following:
•
Four plug adapters (North American, Australian, U.K., and European); 100-240 VAC,
50-60 Hz input, 12 VDC (25 W) output
or
•
Three power cords (North American, U.K., and European); 100-240 VAC, 47-63 Hz input,
12 VDC (24 W) output
1 FT8316/FR8316 Fiber Transmitter and Receiver Installation manual (this manual)
MOUNTING
The FT8316 transmitter/FR8316 receiver can be mounted into a rack or can be used as a stand-alone
module. As a stand-alone module, the unit can be placed on a desktop or can be mounted to a wall.
MOUNTING THE TRANSMITTER/RECEIVER INTO A RACK
The FT8316 transmitter/FR8316 receiver can be installed into an RK5000 Series rack mount chassis,
which can be mounted into an industry-standard 19-inch (48.26 cm) equipment rack. The RK5000
Series rack mount chassis includes the following models:
•
RK5000PS-3U and RK5000-3U:
Designed to accommodate fiber optic modules as follows:
–
The RK5000PS-3U rack mount chassis provides 12 single-width module slots and a
power supply.
–
The RK5000-3U rack mount chassis provides 14 single-width module slots (a power
supply is not included). Power to the modules can be supplied using the optional
external power supply (EPS5000-120).
For additional information, refer to the RK5000PS-3U/RK5000-3U Fiber Rack Mount Chassis
Installation manual.
•
RK5000PS-5U:
Designed to accommodate Endura
™
modules but can also accommodate fiber
optic modules with the use of the appropriate adapter kit. The RK5004-1UEXP adapter kit is
required for installation of the FT8316 transmitter/FR8316 receiver into the RK5000PS-5U
chassis.
For information about the RK5000PS-5U chassis, refer to the RK5000PS-5U Rack Mount Chassis
Installation manual.
NOTE:
The FT8316 transmitter/FR8316 receiver is a quadruple-width fiber optic module that
occupies four slots in the RK5000PS-3U, RK5000-3U, and RK5000PS-5U chassis.
MOUNTING THE TRANSMITTER/RECEIVER TO A WALL
The FT8316 transmitter/FR8316 receiver can be mounted to a wall using the WM5004-3U wall mount
kit, which is designed for mounting of one quadruple-width fiber optic module only. For WM5004-3U
wall mount instructions, refer to the installation instructions provided with the kit.