Filter
Top Products
12 C2458M-E (10/06)
HOW TO CONTROL A SYSTEM USING A PALM OS-COMPATIBLE
HANDHELD
1. Tap the Launcher/Home icon. The main menu appears. Tap the application icon.
2. Select the control protocol of your system, and then enter the address of the system.
NOTE: The handheld will not operate systems using P protocol address 1. Change the P address to
2 or higher. If you normally use Coaxitron
®
, you may need to assign the system a D protocol address
to use the RJ-45 cable.
3. Tap the PTZ button.
LAUNCHER/
HOME ICON
POWER
APPLICATION
ICON
SYSTEM
ADDRESS
SELECT
PROTOCOL
PTZ
BUTTON