Filter
Top Products
8
Mic level input for measuring mic. Phantom power may be selected in software. May be used as a extra input
and routed through the system.
Rotate clockwise or counter clockwise to scroll through screens. Push to enter or confirm selection.
This screen gives a graphical representation of unit configuration and parameter settings. The layout of the screen
and the information displayed will depend on the function being monitored or set.
Configurations are selected here. Parameter selection for inputs, signal generator, stereo/mono, routing matrix,
and outputs.
parameter selection of input or output equalizers
parameter selection of input or output compressor/limiters
parameters of the bandpass modules for each output or configured crossover
delay time and polarity for each input or output
saving and loading of presets as well as default configuration
LEDs indicate active or muted channel conditions. Mute switches are provided to manually mute inputs or
outputs. Signal LEDs are Green for normal signal level, Yellow at +18 dBu output and Red at +20 dBu, just before
the onset of clipping.
Connection of memory stick/jump drive for preset storage and system update and computer connection for
controlling the unit from the GUI. The slot supports USB 2.0 memory sticks whose current draw is 150 ma or
less.
1 2 3
4
5
5
6
6