Filter
Top Products
p.12
features overview
3
2
3
1
2
1
3
rear panel
1
IEC power connector
Accepts a standard IEC terminated power cable
2
Breaker
Resettable circuit breaker - no fuses are used. Breaker can trip due to
a power surge or over-voltage condition. If it trips once, reset it. If it
continues to trip, the amplifier may need servicing.
3
Fan
The fan operates continuously while the amp is on. An internal
temperature sensor increases the speed of the fan during high
temperature conditions. Air enters through the rear of the
amp and exits through the front grill.Be sure to allow adequate air
flow from the rear of the rack the amp is mounted in.
rear panel legend
input connection
XLR connector polarity
TRS connector polarity
bridged mono mode
parallel mode
stereo mode
chassis ground lifted-position
chassis ground grounded-position
output connection
speakon output
channel A stereo/parallel
channel B stereo/parallel
bridged mono
five-way binding post
channel A stereo/parallel
bridged mono
channel B stereo/parallel
1
4
5
6
3
7
8
2
CD owner’s manual