Filter
Top Products
Pro II owner’s manual
p.36
specifications
a
800W 750W
1400W 1350W
2000W 1900W
2800W 2700W
4000W 3800W
92V rms, 130V peak each channel
20Hz–20kHz, +0 / -0.3dB,-3dB@135kHz
20Hz–20kHz, +0 / -0.23dB
<0.05% rated power @ 4Ω, 1kHz
<0.01% rated power @ 8Ω, 60Hz and 7kHz
400:1 10–400Hz @ 8Ω
>60dB @ 1kHz
.775V constant sensitivity, x20 or x40 constant gain
>20kΩ balanced, >10kΩ unbalanced
-110dB, A-weighted below rated power
> -80dB @ 1kHz below rated power
H
two versions: 90–255 or 180–255 vac @ 50–60Hz factory configured
PowerLok power supply with active power factor correction
36A @ 120V
<7.7A @120V
<17.3A @120V
<50A @120V
<1.5A @120V
51A
2083 BTU/Hr
3899 BTU/Hr
back-to-front via two rear-mounted variable-speed DC fans
female and male xlr pin 2+
switch-configurable for pin 3+
speakon connectors and five-way output binding posts
front panel: two attenuators, power switch incorporating magnetic circuit breaker
rear panel: signal ground-lift, mode select, input sensitivity, pin 2/3+
acl, signal, status
bi-color: active / protect
acl, igm, autoramp, short circuit, dc voltage, turn-on/-off transient,
current in-rush, sub/ultrasonic input
aluminum chassis double thickness in rack-ear areas
5.25” x 19” x 18” 133 x 483 x 457mm
height x width x depth
gross:
47lbs 21.7kg
net:
42lbs 19.1kg
five years USA, Canada, United Kingdom, and many other countries
Stereo power 8Ω
4Ω
2Ω
Bridged mono power 8Ω
4Ω
Maximum output voltage
Frequency response
1W @ 8Ω
Power bandwidth rated power @ 4Ω, 1% THD+N
THD
+
N
SMPTE IMD
Damping factor
Input
CMRR
Switch-configurable input options
Input impedance
Hum and noise
Crosstalk
Class
Power supply
Circuit breaker rating
4Ω
Current draw 1/8 power, 4Ω
1/3 power, 4Ω
at power-up
at idle
Peak current draw
Thermal emissions 1/8 Power, 4Ω
1/3 Power, 4Ω
Cooling
Input connectors
Output connectors
Controls
LED indicators
TourClass
®
protection
Construction
Dimensions
Weight
Warranty
1
kHz, 0.1% THD+N 20Hz–20kHz, 0.1% THD+N
see—connections for input sensitivity options
8002