Filter
Top Products
5
XP-30 Owner’s Manual
Setup and Operation
So much for self-congratulation. Lets play some music!
On a more sober note, please read and understand the operational
instructions and safety issues associated with this product.
All of us at Pass Laboratories put great effort into building a soundly
engineered and superbly performing rugged product of lasting
durability and value. We understand that things occasionally go
wrong, but we are here to support you if that happens. If you have
any questions or problems, please contact either your dealer or the
factory.
The support email address is:
service@passlabs.com
If you don’t get a good enough answer, you can appeal to
wayne@passlabs.com
or even
nelson@passlabs.com
It is usually helpful to have your product’s serial number available
when you contact the factory. It is by serial number that we track all
hardware and software details and history of an individual product
unit.
Power Connection
As with all audio electronics the power cable should be the last thing
attached and the first one removed any time you hook up or remove
equipment from the signal chain.
First
The preamplifier’s voltage and current ratings are indicated by affixed
tag on the rear of the preamplifier’s power supply / control module.
The tag will indicate 240 volts, 220 volts, 120 volts or 100 volts.
A 2.0 amp 3AG slow blow fuse is provided with stereo 100 –120 volt
units and a 1.0 amp 3AG slow blow fuse is provided with stereo 220
– 240 volt units.
Set-up