Filter
Top Products
SR2 Owners Manual Rev 0.2
9
rooms which are otherwise lacking in high frequency and down or
counter-clockwise for rooms which tend to sound too bright.
If the listening room allows the listener to be directly on axis with
the drivers and the room is neutral in character then the most likely
setting of this control will be either the mid position or perhaps the
clockwise or lower position. Rooms that require the listener to sit
off axis to the speakers and rooms that have a surfeit of absorptive
surfaces frequently require this control be in the up or
counterclockwise position. Rooms that sound bright and those with
a multitude of hard reflective surfaces typically require this control
be set in the down or clockwise position.
The suggested settings are just that… and nothing more. There is
no substitute for listening and personal judgment. We encourage
users of this product to experiment with level settings and fine
movements of speaker position until the most accurate or pleasant
combination of spectral balance and soundstage are achieved.
Specifications
Passive 3-way design, bi-amp enabled
Impedance: 6 ohms
Sensitivity: 86 dB / watt / meter
Floor space required: 16-1/2 inches wide x 24 inches deep
Overall height: 43 inches
Shipping weight 165 lbs each
And ETC.
We thank you for your confidence, and hope that you enjoy it for
many years.