Filter
Top Products
SR2 Owners Manual Rev 0.2
4
then we say sit back and enjoy the “SR-2” Loudspeaker for what it
does. If you want to enjoy the equipment we say sit back and enjoy
the “SR-2” for all the things it lets you do.
Unpacking
Your SR-2 system comes double boxed with each cabinet in it’s
own pack. Within the double box, each speaker sits in rigid foam
top and bottom trays that facilitate unpacking by a single person.
We do not suggest that you attempt to separate inner and outer
boxes.
Starting with the two large boxes, arrows on the box pointing up:
Carefully cut the tape securing the flaps on the outer box. Open
outer box and repeat for the inner box. Carefully open both of the
boxes exposing the upper and lower foam trays containing the
speakers.
At this point you should be viewing speakers in their normal upright
position. They may be unpacked inverted, but are more stable if
upright at this point.
Grasp the bottom foam tray and slide the tray, with speaker out of
the double box. Remove the top tray and cloth sock, exercising
caution so as to not damage the speakers grill covers in this
process.
Place top tray next to SR-2 cabinet. Lay speaker on its side,
balancing the cabinet squarely upon the top tray, cushioned and
protected against scuffing by the cloth sock. With the speaker on
it’s side, level and balanced upon the top tray remove the bottom
foam tray.