Filter
Top Products
6
Parrot SOUND SYSTEM
• On your Bluetooth source device, search for peripherals (refer to your phone’s user
guide or check out our website at www.parrot.biz/www.parrotsound.com). Select
«Parrot SOUND SYSTEM». You are prompted to enter a PIN code: Enter «0000» on
your source device.
• The Parrot SOUND SYSTEM is ready to receive music.
• Subsequent connections will be established from
your device, without any need to re-enter the PIN code.
• Note: holding down the for three seconds
restores the factory settings.
Playing music
• Press «Play» on your source device and the music
will automatically be sent by Bluetooth to the speakers.
• Play, forward/rewind, stop and pause can be
controlled via the source device.
• The volume can be adjusted on the speakers using
the buttons.
• To mute the speakers (i.e. turn the sound off), hold down for two seconds.
To cancel the mute, press or
• Only one source device can be connected at any one time to stream music to the
speakers.
• Note: some source devices may disconnect from the system if they are not used for
a certain amount of time or if they are moved away. To use the Parrot SOUND SYSTEM
again, you might need to re-establish the connection from the source device. No action
needs to be performed on the Parrot SOUND SYSTEM system. Refer to the user guide
for your source device or check out our website at www.parrot.biz/www.parrotsound.
com for further details on the appropriate procedure.
CONFIG
LED
Volume + ; Volume -
LED
KIT CONTENTS
The kit includes:
• Two Parrot SOUND SYSTEM speakers
• The RCA audio lead
• Two mains leads
• Four adhesive pads.
• Two brackets.
• Four screws for fixing the wall brackets to the speakers
• Two adhesive pads to be fixed to the rear of each speaker if wall-mounting.
• Two removable black magnetic speaker covers
• The user guide.
• The quickstart guide.
• The Parrot product guide
USING FOR THE FIRST TIME
Connecting your source device
• Switch the speakers on. Wait for the LEDs
to turn blue..
• To connect your source device, press the . Wait for the blue LEDs to start flashing
quickly. The system is ready, connect your Bluetooth device.