Filter
Top Products
2
The Bypass Signal Path - Unbalanced Inputs (illustrated below)
The surround receiver’s L & R Preamp Out jacks connect to the JC 2 BP Input 2 Unbalanced
Input jacks. The JC 2 BP Main Output jacks connect to the Input jacks of the power amplifier
driving the L & R speakers.
The Bypass Signal Path - Balanced Inputs (not illustrated)
If you have a surround processor with L & R balanced XLR analog output jacks you can connect
them to the JC 2 BP Input 1 or Input 2 XLR jacks.
Note: If you use Input 1 or 2 for the Bypass function the L & R channel Balanced-Unbalanced
selector switches must be set to correspond to unbalanced or balanced connections.
For example: receiver’s
L & R channel pre out
jacks are connected to
JC 2 BP’s Input 2 jacks.