Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry a cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly
at plugs, convenience receptacles and the point where they exit from
the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination, to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to rain
or moisture, does not operate normally, or has been dropped.
15. Use the mains plug to disconnect the apparatus from the mains or
”TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC
MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE
AC RECEPTACLE.
16. “WARNING – TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
– DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE”
17. “DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR SPLASHING AND
ENSURE THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ARE
PLACED ON THE EQUIPMENT.”
18. “THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN
READILY OPERABLE.”
EN
EN – 2
ESPECIFICACIONES TÉCNICAS
Barra de sonido
Diseño 2 canales (izquierdo y derecho) idénticos aislados. Canal izquierdo: 2 drivers, 2 vías
más radiador pasivo simple. Canal derecho: 2 drivers, 2 vías más radiador pasivo
simple. Gabinete de ABS moldeado con acabado mate
Divisor de frecuencia (Crossover) Electroacústico de 3er orden a 2.4 kHz
Driver de frecuencias altas (por canal) Tweeter con domo de aluminio puro satinado y anodizado de 25 mm (1 pulg.) S-PAL
™
Driver de frecuencias medias y bajas (por canal) 1 cono de material compuesto de 102-mm (4 pulg.), bobina de voz de 37-mm (1-1/2 pulg.)
Radiador pasivo (por canal) 1 cono de material compuesto de 102 mm (4 pulg.)
Extensión de frecuencias bajas* 90 Hz (DIN)
Respuesta en frecuencia Sobre el eje ±2 dB 140 Hz – 20 kHz
30° fuera del eje ±2 dB 140 Hz – 20 kHz
Respuesta en frecuencia del sistema total 40 Hz – 20 kHz
Sensibilidad – Sala / anecoica 88 dB / 85 dB
Potencia total del amplificador 2 x 25 vatios RMS sostenidos / 2 x 50 vatios de pico dinámico
Entradas Digital óptico; 3.5-mm aux. analógico; entrada RCA a RCA; Bluetooth
Altura x ancho x prof. (incluidas las patas) 13.5 x 92.3 x 7.3 cm (5-5⁄16 x 36-3⁄8 x 2-15⁄16 pulg.)
Peso (desembalado) 7.35 lb / 3.34 kg each
Acabado Negro
Accesorios (incluidos) Ménsulas; Patas de estabilidad
ES
ES
ES – 9
Soundtrack_2_Manual_EN_FR_ES_PRINTER_SPREADS_REV4.indd 9-2 13-11-14 10:41 PM