Filter
Top Products
Setup
10
10
RQTX1122
Setup
By using 2 sets of SH-FX71, you can enjoy 7.1-channel playback, making
the surround speakers and surround back speakers wireless (B 7).
≥Keep the digital transmitter of the additional wireless system for later
use.
∫ Pairing
Preparation
≥Make sure to connect the AC power supply cord of the additional
wireless system.
≥Turn on the home theater unit and reduce the volume.
[Note]
≥If you should change the digital transmitter card, repeat the pairing
steps using the new digital transmitter.
≥SH-FX71 cannot be used with SH-FX65, SH-FX67 or SH-FX70.
Using the surround back speakers
Use only a digital transmitter supplied with the SH-FX71.
Wireless system is originally paired to work with the digital
transmitter that comes along with it. For the digital transmitter to
work with the additional wireless system, pairing is necessary.
Pairing is necessary.
Wireless system
Home theater unit
Additional wireless system
e.g. After pairing
1 Turn on the additional wireless system.
2 While pressing the stop button (e.g. [∫]) on the home theater unit,
press the numbered button [2] on the remote control until “P” lights in
the home theater unit’s display.
3 While “P” is displayed, press
[I/D SET] on the rear of the
additional wireless system.
≥The indicator on the additional
wireless system turns green.
≥If “P” goes off before you press
[I/D SET], repeat step 2 and
then continue the procedure.
4 While pressing the stop button on the home theater unit, press the
numbered button [2] on the remote control.
5 Turn off and on the additional wireless system.
≥Make sure the indicator on the additional wireless system lights up
green.
Use a pointed object.
SH-FX71_RQTX1122-1Y_En.book Page 10 Friday, January 22, 2010 2:38 PM