Filter
Top Products
7
RQT9812
Getting Started
How you set up your speakers can affect the bass and the sound field.
Note the following points:
≥Place speakers on flat secure bases.
≥Keep your speakers at least 10 mm away from the system for proper
ventilation.
≥Placing speakers too close to floors, walls, and corners can result in
excessive bass. Cover walls and windows with thick curtains.
≥For optional wall mount, refer to page 20.
Setup example (“Surround layout (Recommended)”: Standard
surround placement)
Place the front, center, and surround speakers at approximately the same
distance from the seating position. The angles in the diagram are
approximate.
§1 Position with at least 5 cm of space on all sides for proper ventilation.
§2 Put on a rack or shelf. Vibration caused by the speaker can disrupt
the picture if it is placed directly on the TV.
§3 Place to the right or left of the TV, on the floor or a sturdy shelf so that
it will not cause vibration. Leave about 30 cm from the TV.
Depending on the room layout, you may like to use all the speakers at the
front (“Front layout (Alternative)”) (B 9, Easy setup).
Notes on speaker use
≥Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
≥Do not touch the front area of the speakers. Hold by the sides.
≥Do not let foreign objects fall inside the speakers.
≥You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
≥Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, a
microphone, noise from FM broadcasts, or continuous signals from an
oscillator, test disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
≥These speakers do not have magnetic shielding. Do not place them
near a TV, PC, or other device that is affected by magnetic fields.
≥Keep magnetized items away. Magnetized cards, watches, etc., can be
damaged if placed too close to the speaker.
Turn off all equipment before connection and read the appropriate
operating instructions.
Do not connect the AC mains lead until all other
connections are completed.
Use an FM outdoor antenna if radio reception is poor.
step 2 Positioning
Caution
≥The main unit and supplied speakers are to be used only as
indicated in this setup. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has occurred
or if you experience a sudden change in performance.
≥Do not attempt to attach these speakers to walls using methods
other than those described in this manual.
120°
60°
Center speaker
§2
Front speaker
(left)
Subwoofer
§3
Surround
speaker (left)
Surround
speaker (right)
Front speaker
(right)
Main unit
§1
step 3 Connections
1
Speaker connections
Pay attention to the type of speaker and the connector colour when you
place the speakers.
Speakers (rear)
Use of the speaker cable stickers is convenient when making cable
connections.
Insert the wire fully, taking care not to insert beyond the wire insulation.
i: White
j: Blue line
≥Be careful not to cross (short circuit) or reverse the polarity of the
speaker wires as doing so may damage the speakers.
Main unit (rear)
Connect to the terminals of the same colour.
[XH380]
You can enjoy surround speaker sound
wirelessly when you use the optional
Panasonic wireless accessory (SH-FX71).
For details, please refer to the operating
instructions for the optional Panasonic wireless
accessory.
IMPORTANT
The speaker cables supplied with the main unit cannot be used with the
optional wireless system.
≥ Remove the cables from the surround speakers (and stands), then
connect using the cables supplied with the optional wireless system.
(To insert the cables through the stands, refer to page 20.)
When using the optional wireless system, do not attempt to connect any
extra surround speakers to the main unit.
When using SH-FX71 (optional), the total RMS Dolby Digital mode power
output is changed. (B 23)
2
Radio antenna connection
FM ANT
(75 )
Main unit (rear)
Affix this end of the antenna to a
wall or pillar where the reception is
best.
FM indoor antenna
(supplied)
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 7 ページ ２０１２年１２月１０日 月曜日 午後８時２７分