Filter
Top Products
6
RQT9812
[XH380] [XH370] Front and Surround speakers
Preparation
≥To prevent damage or scratches, lay down a soft cloth to assemble speakers.
≥Do not touch the front area of the speakers. Hold by the sides.
≥For assembly, use a Phillips-head screwdriver (not supplied).
≥You will need to obtain the appropriate screw eyes to match the walls or
pillars to which they are going to be fastened.
≥Consult a qualified building contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall and speakers, and personal injury.
≥Use a string of less than ‰2.0 mm, which is capable of supporting over
10 kg.
Caution
≥Do not stand on the base. Be cautious when children are near.
≥When carrying the speaker, hold the stand and base parts.
≥Do not let foreign objects fall inside the speakers.
step 1 Preparing the speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
≥Keep the screws out of reach of children to prevent swallowing.
≥For optional wall mount, refer to page 20.
4 Bases 16 Screws2 Front speakers
2 Surround speakers
4 Stands (with cable)
2
1
1
2
Slide into the groove.
Tighten securely.
Position the cable
between the ridges.
Leave about 180 mm.
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue line
Push!
Preventing the speakers from falling
String (not supplied)
Thread from the wall to the speaker and tie tightly.
Speaker (rear)
Screw eye
(not supplied)
Approx.
150 mm
Wall
SC-XH380-370-300_GAGS_RQT9812-G_eng.book 6 ページ ２０１２年１２月１０日 月曜日 午後８時２７分