Filter
Top Products
RQTX0262
13
Changing the sound Changing the sound
quality: Preset EQquality: Preset EQ
Press [PRESET EQ] repeatedly to select
your desired setting.
HEAVY SOFT
CLEAR
FLAT VOCAL
Setting Effect
HEAVY Adds punch to rock
CLEAR Clarifi es higher frequencies
SOFT For background music
VOCAL Adds gloss to vocal
FLAT No effect
Changing the sound Changing the sound
quality: Bass or treblequality: Bass or treble
Enable you to enjoy the lower or higher pitch sound.
1 Press [BASS] or [TREBLE] to select your
desired setting.
2 Press [4/1] or [¡/¢] to adjust the
level.
By main unit only
1 Press [BASS/TREBLE] repeatedly to
select your desired setting.
BASS TREBLE
Original display
2 Press
[4/1] or [¡/¢]
to adjust the
level.
Note:
The level of the pitch is between -4 to +4.
Enhancing the stereo sound: Enhancing the stereo sound:
Surround Surround
soundsound
Enable you to add natural width and depth to the
stereo sound.
To activate
Press [SURROUND] to display “ ”
indicator.
To cancel
Press [SURROUND] again to clear “ ”
indicator.
Note:
• Surround-sound is less discernible when listening
through headphones.
• If interference in FM stereo reception increases,
cancel the surround-sound effect.
Using sound effects
Changing the sound Changing the sound
quality: RE-MASTERquality: RE-MASTER
MP3
This feature reproduces the frequencies lost during
recording to give you a sound closer to the original.
Press [RE-MASTER] repeatedly to select
either “ON RE-MASTER” or
“OFF RE-MASTER”.
USB
MP3
The USB connectivity enables you to connect and
play MP3 tracks from USB mass storage class.
Typically, USB memory devices. (Bulk only transfer)
Connecting a USB mass storage Connecting a USB mass storage
devicedevice
Preparation
Before connecting any USB mass storage device
to the unit, ensure that the data stored therein has
been backed up.
It is not recommended to use a USB extension cable.
The USB device is not recognised by this unit.
USB enabled
device
(not included)
Playing a USB mass storage devicePlaying a USB mass storage device
1 Reduce the volume and connect the USB
mass storage device to the USB port.
2 Press [6, USB] or [OK] to start play.
Pause play
Press [6, USB].
Press again to resume play.
Stop play
Press [
7
] (stop).
“RESUME” is displayed. The
position is memorised.
Press [6, USB] to resume play.
Press [
7
] (stop) again to clear the
position.
Skip tracks
Press [4/1] or [¡/¢].
Skip album
Press [5 / ∞, ALBUM] in the play
mode.
Press [
5 / ∞, ALBUM] once and
then the numeric buttons in the
stop mode.
RQTX0262-2B_gb.indd 13RQTX0262-2B_gb.indd 13 12/16/09 12:11:50 PM12/16/09 12:11:50 PM