Filter
Top Products
RQTX0262
12
Setting the clockSetting the clock
This is a 24-hour clock.
1 Press [CLOCK/TIMER] to select
“CLOCK”.
Each time you press the button:
CLOCK
˚ PLAY
Original display
2 (
Within 5 seconds or so
)
Press [4/1] or [¡/¢] to set the
time.
3 Press [CLOCK/TIMER] again to finish
setting the time.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few
seconds.
Note:
Reset the clock regularly to maintain accuracy.
Using the sleep timerUsing the sleep timer
This function enables you to turn off the unit
automatically after the set time.
Press [SLEEP] repeatedly to select your
desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and
press [SLEEP] again to select your desired time.
Note:
• The play and sleep timer can be used together.
• The sleep timer always has priority. Be sure not to
overlap timer settings.
Using the play timerUsing the play timer
You can set the timer to come on at a certain time to
wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc,
radio, USB or music port source, and set the volume.
Using the timer
1 Press [CLOCK/TIMER] repeatedly to
select the play timer.
CLOCK ˚ PLAY
Original display
2 (
Within 5 seconds or so
)
Press [4/1] or [¡/¢] to set the
time.
Play timer indicator
Start time
3 Press [CLOCK/TIMER] to confi rm.
4 Repeat steps 2 and 3 to set the fi nishing
time.
Finish time
To activate the timer
5 Press [˚ PLAY] to turn on the timer.
˚ PLAY
no display (off)
6 Press [y] to turn off the unit.
The unit must be off for the timer to operate.
Change the
settings
Repeat steps 1 to 4 and 6.
(➡ see above)
Change the
source or
volume
1) Press [˚ PLAY] to clear the
timer indicator from the display.
2) Make changes to the source or
volume.
3) Perform steps 5 and 6. (➡ see
above)
Check the
settings
(when the
unit is on or in
standby mode)
Press [CLOCK/TIMER]
repeatedly to select ˚ PLAY.
Cancel Press [˚ PLAY] to clear the timer
indicator from the display.
Note:
• The play timer will start at the preset time, with the
volume increasing gradually to the preset level.
• The timer comes on at the set time every day if the
timer is on.
• The unit must be in the standby mode for the timer
to function.
• If you turn the unit off and on again while a timer
is functioning, the fi nish time setting will not be
activated.
RQTX0262-2B_gb.indd 12RQTX0262-2B_gb.indd 12 12/16/09 12:11:45 PM12/16/09 12:11:45 PM