Filter
Top Products
RQT6682
17
Listening operations
Recording CDs
Normal recording
• Tracks are recorded in the order in which they are found
on the CD.
• Tracks are cut in the middle when the end of the tape is
reached.
• You can record from any point on the tape.
1 Insert the cassette to be recorded on.
(\ page 15)
2 Press [STOP L] to select the CD mode.
3 Press [OPEN/CLOSE c] to open the CD tray.
Insert the CD with label facing upward.
Press [OPEN/CLOSE
cc
cc
c] to close the CD tray.
4 Press [[REC/ J] to start recording.
The recording will start from the first track.
To stop recording
Press [STOP L].
The recording and the CD will stop.
To stop recording temporarily
Press [[REC/ J].
To resume recording, press [[REC/ J].
To record from a specific point on a tape
Before recording, advance the tape to the point from where
you want to start recording.
To record programmed tracks
After step 3, program the track(s) you want (\ steps 2-4
on page 14).
Press [[REC/ J] to start recording.
2
3
4
4
2
3
STOP
OPEN CLOSE
REC
Recording operations
REC
RQT6682(11-24)NEW.P65 3/24/05, 12:06 PM17