Filter
Top Products
Getting started
9
Before use
E.g.,
≥ If irregular colouring occurs on your TV, turn the TV off for about 30 minutes. If it persists, move this unit further away
from the TV.
≥ Do not use this unit in a metal cabinet.
Step 1 Placement
Caution
≥ This unit and the active subwoofer are to be used only as indicated in these instructions. Failure
to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has occurred or if you experience a sudden
change in performance.
≥ Do not attempt to attach this unit to a wall using methods other than those described in this
manual.
This unit
On the wall In a rack
or on a table
Page 11
Refer to “When placing the unit on a
wall”
Page 14
Refer to “When placing the unit in a rack or on a table”
∫ When placing the unit in front of the TV.
This unit may block or interfere with the TV’s various sensors (C.A.T.S. (Contrast Automatic Tracking
System) sensor, remote control sensor, etc.) and the 3D Eyewear transmitters on a 3D compatible TV.
Depending on how this unit is placed, this unit might block the TV’s remote control signal sensor.
If the stands are being used
≥Change the height of the stands and/or move this unit farther away from the TV. If the TV still does not
function correctly, try removing the stands.
If the stands are not used
≥Move this unit farther away from the TV. If the TV still does not function correctly, try using it in a rack or
in the wall mount position.
∫ If the TV’s remote control sensor is blocked by this unit.
Try using the TV’s remote control from a different angle. If the problem persists, you can use the supplied
IR Blaster to relay the signal to the TV. (> 18)
≥ Do not use the IR Blaster if the TV’s remote control sensor is not blocked by this unit.
SC-HTB520EGEBGNGS_RQTX1279-B.book Page 9 Tuesday, February 22, 2011 9:05 AM