Filter
Top Products
Getting started
RQT9777
15
Drive a screw into the wall.
Fit the speaker(s) securely onto the screw(s).
≥ Use the measurements indicated below to identify the
screwing positions on the wall.
≥ Leave at least 20 mm (
25
/32q) of space above and on each
side of the speaker to allow enough space for fitting the
speaker.
≥ Keep the screws out of reach of children to prevent
swallowing.
A
At least 30 mm (1
3
/
16
q
)
B ‰4.0 mm (
5
/32q)
C ‰7.0 mm to ‰9.4 mm (
9
/32q to
3
/8q)
D Wall or pillar
E 5.5 mm to 6.5 mm (
7
/32q to
1
/4q)
F Front speaker
(Rear view)
G 100 mm (3
15
/16q)
H 436 mm (17
5
/32q)
I 34 mm (1
11
/32q)
J Wall mounting hole
Red connector: The speaker attached to the red connector cable is to be placed on the right side.
White connector: The speaker attached to the white connector cable is to be placed on the left side.
K Left speaker connector L Right speaker connector
DO DO NOT
≥ Move the speaker so
that the screw is in this
position.
≥ In this position, the
speaker will likely fall if
moved to the left or
right.
Red
White
SC-HTB370PPC_RQT9777-1P_mst.book Page 15 Tuesday, January 29, 2013 11:48 AM