13
RQT7429
Radio and system connection/The remote control
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long
period of time. Store in a cool, dark place.
∫ Use
Aim at the sensor (‹ page 14), avoiding obstacles, at a maximum
range of 7 m directly in front of the unit.
STEP5 Radio and system connection
CO
V
P
B
P
R
A
L
R
TV
AUDIO
IN
VCR
AUDIO
IN
AUX
LINE
OUT
AM ANT
LOOP
EXT
FM ANT
(75
h)
1
2
VOLT ADJ
127 V 110 V 220 V-230 V 240 V
System cable
AM loop
antenna
FM indoor
antenna
AC mains lead
Subwoofer
Adhesive tape
Fix the other end of the antenna
where reception is best.
AM loop antenna
Click!
System cable
To household mains socket
FM indoor antenna
Catch up
To disconnect
Press the catch
and pull out.
To disconnect
Press the catch
and pull out.
[The\United\Kingdom,[
[Saudi[Arabia]and[Kuwait]
\Southeast\Asia,\the\Middle\East,\
\South\Africa,\Saudi\Arabia\and\Kuwait[
Before connecting the
AC mains lead
Set the voltage.
Use a flat-head screwdriver to turn
the voltage selector on the back of
the subwoofer to the appropriate
position for the area in which this
system is used.
If the power supply in your area is
115 V or 120 V, please set the voltage
selector as follows:
≥For 115 V: Set to 110 V.
≥For 120 V: Set to 127 V.
AC mains lead
Conserving power
The main unit consumes a small amount of power, even when it is turned
off (For the United Kingdom, Continental Europe, Russia, Australia and
N.Z.: approx. 0.7 W or for Southeast Asia, the Middle East, South Africa,
Saudi Arabia and Kuwait: approx. 0.9 W). To save power when the unit is
not to be used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the unit.
Main unit
[Australia\and\N.Z.]
Stand the antenna up on its base. Place
the antenna where the reception is best.
Keep loose antenna cable away from
other wires and cables.
Catch up
≥Connect the AC mains lead after all other connections are complete.
≥Optional antenna connections (‹ page 27).
[The\United\Kingdom,[Saudi[Arabia]and[Kuwait]
BE SURE TO READ THE CAUTION FOR THE AC
MAINS LEAD ON PAGE 3 BEFORE CONNECTION.
[[Continental[Europe,[Russia,[Southeast]
]Asia,[the[Middle[East,[South[Africa,[Saudi[
[Arabia[and[Kuwait]
STEP6 The remote control
R6/LR6, AA, UM-3
2
3
1
Remote control
Batteries
≥Do not use
rechargeable type
batteries.
Insert so the poles (i and j) match
those in the remote control.
7429en-p03-30.fm 13 ページ 2004年3月5日 金曜日 午後3時54分