Filter
Top Products
RQTX1146
RQTX1146
4
ENGLISH
RQTX1146
RQTX1146
2
1
IMPORTANT SAFETY INSTRUCTIONS 2
Listening caution 3
Product service 3
Supplied accessories 4
Connections 4
Attaching the unit to a wall (Optional) 5
Control guide 8
Disc operations 9
Radio operations 10
Timer 11
Sound adjustment 11
External unit 11
Memory reset (Initialization) 14
Troubleshooting guide 15
Maintenance 16
Specifications 16
Limited Warranty 17
Table of contents
Connections
g Notes on speakers
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
The speaker nets cannot be removed.
•
•
4 5
Tape the antenna to a wall or column, in a position with the
least amount of interference.
•
Connect the FM indoor antenna.
1
FM indoor antenna
Adhesive tape
2
Connect the AM loop antenna.
Keep the loose antenna cord away from other wires and cords.•
3
Connect the AC power supply cord after all other connections
are complete.
Connect the AC power supply cord.
To household AC outlet
Avoid listening for prolonged periods of time to prevent hearing
damage.
Excessive sound pressure from earphones and headphones can
cause hearing loss.
Listening at full volume for long periods may damage the user’s
ears.
Be sure to use the supplied or recommended headphones or
earphones.
•
•
•
Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (1/8") stereo
Headphones (not included)
4
Portable audio equipment (during AUX mode)
5
Plug the audio cord into the AUX jack.
Plug type: 3.5 mm (1/8") stereo
Press [AUX] and start playback from the
portable audio source.
You can select the sound input level of the portable audio
equipment.
Press [PLAY MODE] repeatedly to select “HIGH” or “NORMAL”.
Switch the equalizer off or turn the volume of the portable
equipment down to reduce the input signal. High level of input
signal will distort the sound.
For details, refer to the instruction manual of the other equipment.
Cords and equipment are not included.
•
•
•
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (Product numbers are correct as of
February 2010. These may be subject to change.)
To order accessories, refer to “Accessory Purchases
(United States and Puerto Rico)” on page 17.
Supplied accessories
AUX
Back View
Exhaust holes
5 4
3 2
1
USB cover
Stand the antenna
up on its base.
Click!
AM loop antenna
AC IN
AUX
B
1 AC power supply cord
(K2CB2CB00021)
1 AM loop antenna
(N1DYYYY00010)
1 FM indoor antenna
(RSAX0002)
2 Batteries
1 Remote control (N2QAYB000523)
Screw accessories (RFAX1020)
2 Fixing screws
(XYN3+J10FJ)
1 Safety holder
(RMKX1015)
Wall bracket accessories (RFAX1021)
1 Wall bracket
(RGQX1004)
Four-legged cushions
(RKAX0028-K)
The included AC power supply cord is for use with this unit only. Do
not use it with other equipment.
Do not use an AC power supply cord of other equipment.
•
•