Filter
Top Products
RQTX0250
Press [CD ;, OPEN/CLOSE] again to close the sliding door.
Keep fingers away from the sliding door when it is closing to avoid
possible minor injuries.
Press [CD q/h] or [OK] to start play.
Press [VOL +, –] to adjust the volume.
Be
sure to press the [CD ;, OPEN/CLOSE] button to open and close the
sliding door. Damage may occur if the sliding door is forced closed.
Be careful of CD hitting the sliding door while being removed.
•
•
Press [^] to turn the unit on.
Press [CD
;
, OPEN/CLOSE] to open the sliding door and then set
the CD in place.
8
Disc operations
To Action
stop
Press [g].
pause
Press [CD q/h].
Press again to resume play.
skip/search
Press [u/t] or [y/i] to skip.
Press and hold [u/t] or [y/i] to search.
You can search during play or while paused.
You cannot search through MP3 files.
You can only search within the current track during
program play, one track repeat, and random play.
•
•
•
skip album
Press [e,r, ALBUM] in the play mode.
Press [e,r, ALBUM] once and then the numeric buttons
in the stop mode.
direct
access play
(Play starts
with the
track you
select.)
Press the numeric buttons to select the desired track.
Press [e,r, ALBUM] to select the album.
Press [y/i] once and then press the numeric
buttons to select the desired track.
Note
MP3
CD
MP3
Basic play
Note
Program play
The function allows you to program up to 24 tracks.
Press [CD q/h] and then [g].
Press [PROGRAM].
Press the numeric buttons to select tracks.
Repeat this step to program other tracks.
Press [CD q/h] or [OK] to start play.
Press [CD q/h] and then [g].
Press [PROGRAM].
Press [e,r, ALBUM] to select your desired album.
Press [y/i] once and then press the numeric buttons to select
tracks.
Press [OK].
Repeat step 3 to 5 to program other tracks.
Press [CD q/h] to start play.
To Action
cancel program
mode
Press [PROGRAM] in the stop mode to clear
“PGM” indicator from the display.
replay the program
Press [PROGRAM] then [CD q/h].
check program
contents
Press [u/t] or [y/i] when “PGM” is
displayed in the stop mode. To check while
programming, press [PROGRAM] twice after
“PGM” appears, then press [u/t] or [y/i].
clear the last track Press [DEL] in the stop mode.
clear all
programmed tracks
Press [g] in the stop mode.
“CLR ALL” is displayed. Within 5 seconds, press
the button again to clear all tracks.
When you try to program more than 24 tracks “PGM FULL” appears.
The program memory is cleared when you open the sliding door.
During program play, you can search backward or forward only within the
current track.
•
•
•
Note
CD
MP3
CD
Press [CD q/h].
Press [PLAY MODE] to select the desired mode.
Mode To play
1-TRACK
1TR
one selected track on the disc.
Press the numeric buttons to select the track.
1-ALBUM
1ALBUM
one selected album on the disc.
Press [e,r, ALBUM] to select the album.
RANDOM
RND
a disc randomly.
1-ALBUM
RANDOM
1ALBUM RND
all tracks in one selected album randomly.
Press [e,r, ALBUM] to select the album.
MP3
MP3
Note
During random play, you cannot skip to previous track.
The current play mode is cleared when you open the sliding door.
•
•
Play Mode function
During RANDOM play, you can search backward or forward only within
the current track.
•
CD
This function allows you to display the information of the current track.
Press [DISPLAY] repeatedly during play or pause.
CD
MP3
Elapsed play time Remaining play time
Display function
Album name Track name
ID3 (Artist) ID3 (Track) ID3 (Album)
Elapsed play time
Note
Maximum number of displayable characters: approximately 30.
This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not supported
will not be displayed.
ID3 is a tag embedded in MP3 tracks to provide information about the
track.
•
•
•
Label must face outward.
Press until you hear it clicks
into place.
•Tilt the CD to the left and
slide it in place.
•
Center part
SC-HC3_En (RQTX0250-2P)_032509.indd 8 3/25/2009 9:55:54 AM